Al-Base
- Additive Manufacturing (AM) (15)
- Al-Base (72)
- Cast Iron (49)
- Co-Base (8)
- Corrosion Damages (43)
- Cu-Base (75)
- Edge zone (40)
- Failure Cases (60)
- Fe-Base (333)
- Fe-Heat Treatment Series (91)
- Mg-Base (3)
- Ni-Base (24)
- Other (19)
- Plastics (15)
- SEM (99)
- Ti-Base (10)
- Zn-Base (5)
- AA-6020 as cast
- Al extruded profile with alleged extrusion defect
- EN AC-42200 | AlSi7Mg0,6 (T6) Sand casting, vibration corrosion cracking
- EN AC-42200 | AlSi7Mg0,6 | A357.0 Sand casting
- EN AC-42200 | AlSi7Mg0,6 Fatigue fracture vs. overload fracture
- EN AC-43000 | AlSi10Mg AM | LMD-W
- EN AC-43000 | AlSi10Mg die casting, Cold flow marks
- EN AC-43200 | AlSi10Mg(Cu) Gravity die casting
- EN AC-43200 | AlSi10Mg(Cu) Sand casting
- EN AC-43500 | AlSi10MnMg
- EN AC-43500 | AlSi10MnMg Cold run and hot crack
- EN AC-45500 | AlSi7Cu0,5Mg
- EN AC-46000 | AlSi9Cu3 non-refined sand casting
- EN AC-46000 | AlSi9Cu3(Fe)
- EN AC-46000 | AlSi9Cu3(Fe) not refined
- EN AC-46200 | AlSi9Cu3 sandcasting
- EN AC-47100 | AlSi12Cu1(Fe)
- EN AC-48000 | AlSi12CuNiMg
- EN AC-48000 | AlSi12CuNiMg – Nikasil-coating
- EN AC-48000 | AlSi12CuNiMg – PowerSeal-coating
- EN AC-71100 | G-AlZn10Si8Mg
- EN AW-2007 | AlCu4PbMg
- EN AW-2007 | AlCu4PbMg | AA2007 Cracks due to cumulative and coarse precipitations
- EN AW-2007 | AlCu4PbMgMn | 3.1645
- EN AW-2011 | AlCu6BiPb
- EN AW-2014A | AlCu4SiMg as-cast condition
- EN AW-2017A | AlCu4MgSi | AA2017A
- EN AW-2017A | AlCu4MgSi | AA2017A as-cast condition
- EN AW-2024 | AlCu4Mg1
- EN AW-2024 | AlCu4Mg1 | AA2024 in the as-cast condition
- EN AW-2030 | AlCu4PbMg | AA2030 as-cast condition
- EN AW-2124 | AlCu4Mg1(A)
- EN AW-2219 | AlCu6Mn | AA2219 as-cast condition
- EN AW-2618A | AlCu2Mg1.5Ni | AA2618A as-cast condition
- EN AW-3003 | Al Mn1Cu
- EN AW-3003 | AlMn1Cu | AA3030
- EN AW-5019 | AlMg5 intergranular corrosion
- EN AW-5051A | AlMg2 GDR penny from 1981
- EN AW-5083 | AlMg4,5Mn0,7
- EN AW-5083 | AlMg4,5Mn0,7 | AA5083 as-cast condition
- EN AW-5754 | AlMg3
- EN AW-6005A | AlSiMg(A)
- EN AW-6016 | AlSi1.2Mg0.4 | AA6016 as-cast condition
- EN AW-6026 | AlMgSiBi | AA6026 as-cast condition
- EN AW-6056 | AlSi1MgCuMn electrolytically etched
- EN AW-6060 | AlMgSi0,5 | AA6060
- EN AW-6061 | AlMg1SiCu
- EN AW-6061 | AlMg1SiCu | AA6061 as-cast condition
- EN AW-6063 | AlMg0.7Si
- EN AW-6064A | AlMg1SiBi | AA6064A as-cast condition
- EN AW-6082 | AlSi1MgMn | AA6082
- EN AW-6082 | AlSi1MgMn | AA6082 in the as-cast condition
- EN AW-6082 | AlSi1MgMn | AA6082 T6
- EN AW-6082 | AlSi1MgMn electrolytically etched
- EN AW-6106 | AlMgSiMn
- EN AW-6262 | AlMg1SiSn | AA6262 as-cast condition
- EN AW-7010 | AlZn6MgCu | AA7010
- EN AW-7020 | AlZn4,5Mg1 | AA7020
- EN AW-7021 | AlZn5,5Mg1,5 | AA7021
- EN AW-7022 | AlZn5Mg3Cu | AA7022 as-cast condition
- EN AW-7049A | AlZn8MgCu | AA7049A as-cast condition
- EN AW-7050 | AlZn6CuMgZr
- EN AW-7060 | AlZn7CuMg
- EN AW-7075 | AlZn5,5MgCu | AA7075 as-cast condition
- EN AW-7075 | AlZn5,5MgCu | AA7075 Barker etching
- EN AW-7075 | AlZn5,5MgCu1,5 Fatigue Corrosion Cracking
- EN AW-7075 T6 | AlZn5,5MgCu | AA7075 T6 TiC-alloyed
- EN AW-7175 | AlZn5,5MgCu(B) | AA7175 as-cast condition
- EN AW-8006 | Al Fe1.5Mn
- Pore penetrated die casting component
- RSA-905
- RSA-905 inhomogeneous