Ni-Basis
![banner-gdb-ni-basis](https://www.schmitz-metallographie.de/wp-content/uploads/2022/07/banner-gdb-ni-basis.jpg)
- Additive Fertigung (AM) (15)
- Al-Basis (70)
- Co-Basis (8)
- Cu-Basis (75)
- Fe-Basis (318)
- Fe-Wärmebehandlungsreihe (85)
- Gusseisen (48)
- Korrosionsschäden (43)
- Kunststoffe (15)
- Mg-Basis (3)
- Ni-Basis (23)
- Randzone (38)
- REM (100)
- Schadensfälle (60)
- Sonstige (16)
- Ti-Basis (10)
- Zn-Basis (5)
2.4605 | Alloy 59 Schwingbruch vs. Gewaltbruch eines Drahtes
2.4608 | NiCr26MoW
2.4668 | Inconel 718 mit delta-Phase
2.4668 | NiCr19NbMo | Inconel 718
2.4668 | NiCr19NbMo | Inconel 718 boriert
2.4668 | NiCr19NbMo | Inconel 718 Fließspan
2.4668 | NiCr19NbMo | Inconel 718 L-PBF Bauteil
2.4668 | NiCr19NbMo | Inconel 718 Laserschweißung
2.4668 | NiCr19NbMo Fülldraht aus Inconel 718 mit Hartstoffen
2.4668 Inconel 718 Auftragsschweißung
2.4816 | NiCr15Fe | Inconel 600
2.4819 | Alloy C-276 Schweißnaht
2.4819 | NiMo16Cr15W | Alloy C-276
2.4856 | NiCr22Mo9Nb | Alloy 625
2.4858 | NiCr21Mo Drahtgewebe
2.4879 | G-NiCr28W
2.4879 | G-NiCr28W
2.4879 | G-NiCr28W Bruch einer Ofenrolle
2.4879 | G-NiCr28W Ofenrolle
Backofen-Heizwendel
Inconel 713C | NiCr13MoAl
LKW-Ventilstößel | EDX-Analyse des Hartauftrags
MAR-M200